Sub-Floor is a controlled density mortar specifically designed to serve of leveling and seat of flats. The most minimum thickness of application of this product is 4 cm. Can be applied even in interiors as in elements and with slopes. It is produced and pumped since the low plant through hoses of rubber of 2" of diameter. It is produce by three operatives to reason of 50 m3 by day, depending on the distribution of work. The height of normal pump with a team Magma CB-4500 T is of 70 – 100 meters (depending on horizontal sections. For greater heights is implemented overpumping). By being a cementitious product it is Fireproof, non-putrid and homogeneous in its mass.

Engineering specifications

According to the application that intend to be given to the sub-floor material, the adequate proportioning is designed, of which all the characteristics of the final material will depend.  • Humid Density / dry density • Resistance to the compression • Acoustic Isolation • Thermic Isolation  Humid Density Kg/ m3 Dry Density Kg/ m3 Compres Resistance Kg/ cm2 Termic Conduc. W/ Mk Cementicious Factor Kg/m3 Sand Another 320 250 3.50 0.13 187 no 480 400 10 0.15 300 no 700 600 14 0.18 300 si 920 800 16.8 0.23 300 si 1120 1000 24 0.32 300 si 1330 1200 40 0.38 300 si 1540 1400 60 0.45 300 si Operative advantages of work: - VELOCITY - PUMP of the material (eliminating the horizontal and vertical transportation of materials). - ELABORATION AND PLACEMENT, entirely to our charge, without aid of guild of any kind. - Greater cleaning and smaller wastes - Only three people in work.